Diesel return flow set including quick couplings
The RFS 400 PRO is a closed return flow measuring system for injectors of common rail diesel vehicles.
The PRO version is complete with special reducers, connections and quick couplings.
The RFS 400 PRO is connected via hoses to the return connection of the injectors. The RFS 400 PRO is linked to an (automotive) scope, so that the return flow can be digitized. This allows the injectors in the car to be tested in the workshop and without dismantling. The digital image can be saved or printed to serve as proof for the repair advice.
By means of the pre-set measurements in the ATIS software program, the values are indicated exactly in pressure (mbar) in the scope screen. It is also possible to set the scope software so that the measured value corresponds in the scope screen. See manual of the scanning software.
Operation RFS 400 PRO
By using highly sensitive sensors, placed in a sturdy housing, the RFS 400 PRO is able to accurately measure very small return current from the common rail injectors. The measured value can be seen on the scan image by means of a graphic line. With the RFS 400 PRO and a 4-channel (automotive) scope, four return flows can be made transparent and compared. The measurement can be performed twice for several cylinders.
Effective measuring range
1 ml / min - 160 ml / min
4 x 2 banana connection for scope cables
4 x hose connection input
1 x hose connection outlet
9 to 30 volts (the RFS 400 PRO has clamps to attach to the battery for power supply)
-10 ° C / + 80 °